Overview
Quick repair of defects such as longitudinal tearing, holes, scratches, and cover rubber falling of the conveyor belt.
Supplied and supported by ELMEK for Australian sites. Specifications below are indicative — we confirm the exact configuration against your conveyor, tonnage and pulley dimensions before quoting.
Specification
| Property | Index | Remark |
|---|---|---|
| Color | adhesive-no color hardener-black | -- |
| Apply method | inject,scraper | easy operate,lower cost |
| Density/25℃ | 1.05-1.15 g/cm3 | -- |
| Coverage | 0.9m2 /kg (1mm thickness) | effective coverage |
| Gel time(25℃) | 6-10min (2mm thickness) | effectively saving time |
| Hardness(24h later,at 25℃) | shore A 60~65; Shore-A 70 (80℃) | strength and toughness |
| Tensile Strength | 7.5-10Mpa | allow tension |
| Elongation | 300-400% | Flexible and strong |
| Tear strength | 38-45kN/m | tear |
| Abrasion resistance | 120-170 | not easy to wear |
| High temp performance | 80-90℃ | very good |
| Package | 400mL/package | -- |
Product gallery
Also in Repair, Splicing Tools
Conveyor Belt Splicing Joint Rubber
We have several types of Conveyor Belt Splicing Joint Rubber,such as Wear-resistant,Steel Cord,Oil-resistant,Low Temperature Resistant,Heat-resistant,Acid and Alkali Resistant and Special Filler Rubber for Steel Cord Belt.
Screw Splice conveyor belt splicing
Compared with other rubber joint technique, ELMEK conveyor belt rubber joint can provide a faster and safer conveyor belt connection method. It can be used in an environment with a temperature of -60C to 170C. Special models are provided for acid and a…
Cold Bond Cement
ELMEK 1997 is two component-adhesive for bonding Rubber-Rubber, Rubber-Metal, Fabric-Fabric, Rubber-Fabric.